🚚 Free delivery on orders over HK$400 (homes, SF points and lockers) ⏰ Order by 4pm Mon–Fri, delivered in 5–7 working days 🏫 School & organisation orders: WhatsApp 6672 1884 📚 Free activities and printables → kidrise.com.hk/en/resources 🚚 Free delivery on orders over HK$400 (homes, SF points and lockers) ⏰ Order by 4pm Mon–Fri, delivered in 5–7 working days 🏫 School & organisation orders: WhatsApp 6672 1884 📚 Free activities and printables → kidrise.com.hk/en/resources
Kidrise Explorer Kit · Little Engineer

🛠️ Little Engineer Kit

Paper bridges, a catapult, circuits, ramps and an earthquake tower: solve 5 challenges with the engineering design cycle.

In developmentAges 6–105 missions per boxEnglish instructions online
About this kit

About the Little Engineer Kit

Engineers don't get it right first time. They design, test and improve. Every mission in the Little Engineer Kit is an open challenge with no single answer, only better designs. Using lolly sticks, rubber bands, wires and LEDs, children explore structures, levers, circuits and friction, and learn to compare their designs with data.

  • Engineering challenges have no standard answer, which is the best way to build problem solving and creativity
  • Every mission involves measuring and recording data, so maths practice comes naturally
  • Failure is part of design, which builds a growth mindset
Ages 6–10Suggested age
5missions that build step by step
6free mission worksheets
Coming soonJoin the waitlist for updates
What's inside

What's in the box?

Planned contents. Final items and quantities may change at launch.

Lolly sticks × 40 and wooden pegsFor building catapults, bridges and towers
Rubber bands, bottle caps and stringFor elastic power and mechanisms
Crocodile clip wires × 3For connecting simple circuits
LEDs × 3 and AA battery boxA safe low-voltage circuit (batteries not included)
Mini car wheel and axle setBuild a car for the ramp tests
Tape measure and angle cardMeasure distances and ramp angles
Engineering notebookPages for designs, test data and improvements
Mission cards × 5 and QR code videosIn Traditional Chinese, with question prompts for parents
5 missions

5 missions, every step shared

Each mission comes with materials, steps, questions for parents and an extension challenge. No kit yet? You can try most missions with things you have at home.

1
Mission 1

Paper Bridge Challenge

⏱ 30 min📍 Indoors

Goal: Explore how shape affects strength, and practise fair testing and recording data.

🧰 You'll need

  • Engineering notebook
  • (From home) A4 paper, two stacks of books, coins, tape

🧭 Steps

  1. Put two stacks of books 15 cm apart, lay a flat sheet across as a bridge and count how many coins it holds.
  2. Fold the paper into a U-shape, a zigzag or a tube, and test again.
  3. Test each design twice and record the average.
  4. Find the strongest design and think about why.
  5. Challenge: hold as many coins as possible with just one sheet.

💬 Questions to ask

  • “Why is folded paper so much stronger?”
  • “Which real bridges use similar shapes?”
  • “What makes a test fair?”

🚀 Extension challenge

Move the books further apart. Is your strongest design still the strongest?

2
Mission 2

Lever Launcher

⏱ 40 min📍 Indoors

Goal: Learn about levers and pivots, and how the pivot's position changes how far things fly.

🧰 You'll need

  • Lolly sticks
  • Rubber bands
  • Bottle cap
  • Tape measure
  • (From home) paper balls or cotton wool balls

🧭 Steps

  1. Follow the mission card to band the lolly sticks into a catapult, with the bottle cap as the launch cup.
  2. Stick a strip of tape on the floor as the start line.
  3. Launch a paper ball 3 times, measuring and recording each distance.
  4. Move the pivot (the crosswise stick) forward or back and test 3 more times.
  5. Compare the data to find the pivot position that launches furthest.

💬 Questions to ask

  • “Does it go further with the pivot near the cup or far from it?”
  • “Does pressing harder always launch further?”
  • “How is a seesaw like a catapult?”

🚀 Extension challenge

Make a target, work out your hit rate, then improve your aim.

3
Mission 3

Light It Up

⏱ 30 min📍 Indoors

Goal: Learn what makes a simple circuit, and tell conductors from insulators.

🧰 You'll need

  • Crocodile clip wires
  • LED
  • AA battery box (needs 2 AA batteries)
  • (From home) spoon, eraser, pencil lead, foil, wooden peg, etc.

🧭 Steps

  1. Follow the mission card to connect the battery box, wires and LED in a loop so the LED lights up.
  2. Open one clip and watch the LED go out: a circuit must be closed for electricity to flow.
  3. Leave a gap in the circuit and test different objects in it one by one.
  4. Record which objects light the LED (conductors) and which don't (insulators).
  5. Draw a diagram of your circuit.

💬 Questions to ask

  • “Does the LED light if you connect it the other way round?”
  • “Why are wires covered in plastic?”
  • “Which appliances at home use switches? How does a switch work?”

🚀 Extension challenge

Connect two LEDs side by side (parallel) or one after the other (series) and compare the brightness.

4
Mission 4

Ramp Racer

⏱ 35 min📍 Indoors

Goal: Explore how steepness and surfaces change how far a car rolls, and learn about friction.

🧰 You'll need

  • Mini car wheel and axle set
  • Tape measure and angle card
  • (From home) stiff card, books, a towel, foil

🧭 Steps

  1. Build the car and make a ramp from card and books.
  2. With the ramp on 1 book, test 3 times and measure how far the car rolls.
  3. Raise it to 2 and then 3 books and repeat.
  4. Keep the height the same, cover the floor at the bottom with a towel or foil, and test again.
  5. Compare the data: which condition makes the car go furthest?

💬 Questions to ask

  • “Does a higher ramp always make the car go further?”
  • “Which has more friction, the towel or the foil?”
  • “Why should we walk slowly down a slope on a wet day?”

🚀 Extension challenge

Improve the car (add weight, change wheels) and try to break the distance record.

5
Mission 5

Earthquake Tower

⏱ 45 min📍 Indoors

Goal: Put structural knowledge together and work through the whole engineering design cycle.

🧰 You'll need

  • Lolly sticks and wooden pegs
  • Engineering notebook
  • (From home) a baking tray, paper cups, tape, a timer

🧭 Steps

  1. The challenge: build a tower at least 30 cm tall with 20 lolly sticks and 10 pegs.
  2. Draw a design first and predict its weak points.
  3. Put the tower on the baking tray and shake it gently side to side for 10 seconds to simulate an earthquake.
  4. Record whether it fell and which part came loose first.
  5. Improve the design and test again, for at least two rounds of improvements.

💬 Questions to ask

  • “Which is steadier, a wide base or a narrow one?”
  • “Which is stronger, a triangle or a square?”
  • “How do real skyscrapers survive earthquakes?”

🚀 Extension challenge

Add a load: the top must hold a paper cup with 10 coins in it.

What kids learn

What your child will learn

Structures

How shape affects strength

Levers

How the position of the pivot changes the force

Simple circuits

A circuit must be closed for electricity to flow

Friction and slopes

How steepness and surfaces affect speed

Recording data

Measuring, comparing and drawing conclusions

The design cycle

Design, test, improve

📚 Links to Hong Kong primary science

Forces and motionPushes, pulls, friction and slopes
Simple machinesLevers and pivots
Electricity and simple circuitsBatteries, wires and bulbs in a closed circuit; conductors and insulators
Materials and structuresHow shape and material affect strength
Science and technology inquiryDesigning, making, testing and improving

Primary Science is being introduced in phases from the 2025/26 school year, and schools may order topics differently, so this is for reference only.

5-week plan

5 weekends,
one mission a week

No need to do them all at once. Pick a time each week, and add a completion stamp to the mission passport when you finish.

Tips for parents

  • Let children try first, and resist giving them the “right” design too soon
  • Record data in every mission to build the habit of drawing conclusions from evidence
  • After a collapse, ask “where did it go wrong?” before improving it together
  • Photograph every design to make an engineering portfolio
⚠️ Safety: Circuit missions use AA batteries only. Never connect to mains power or open batteries. The catapult may only launch paper balls or cotton wool balls, never aimed at people or animals. Rubber bands and small parts are not suitable for children under 3.
Try before the box

Free mission worksheets and activities

Print the mission sheets for free and try the related activities with things you already have at home, no kit needed.

All free printables →
FAQ

Little Engineer Kit FAQ

When will the Little Engineer Kit launch?

It's in development and play testing now. Join the waitlist and we'll tell you first.

Is the circuit mission safe?

The circuit only uses AA batteries and LEDs, which are low voltage. The mission card sets out clear safety rules and we recommend an adult is present. Batteries are not included.

Can a 6-year-old do it?

Ages 6–7 can complete it with an adult's help, focusing on building and testing. From age 8, children can record data and improve designs on their own.

Can schools use it?

Yes. We also make school sets designed for classes of 20–30. See our Schools page or contact us for a quote.

Be one of our first test families

Priority trial spots and a vote on new themes. No subscription and no automatic charges.

Other Explorer Kits

WhatsApp us